Empty the Urine BagYou must drain the urine bag prior to cleaning any part of the catheter system.A urinary catheter should be cleaned after it has been drained a total of three times. Swab the opening of the catheter tube with one alcohol pad, and swab the opening of a new drainage bag with another alcohol pad. Clean the Drainage BagPour a solution cpvc pipes meaning of soapy hot water into the old drainage bag. Rinse the insertion site with warm water and pat the area dry with a clean towel. Disconnect the catheter tube from the drainage tube at the connection valve. After the old bag has drained, clean the valve with an alcohol wipe before closing it. Clean the insertion site with soap, warm water and a towel in a circular motion prior to handling the catheter system. You do not want any urine moving back up into the tubing and into your bladder while you handle the catheter. Do not allow the open valve to touch anything, including your hands.Cleaning the catheter insertion site is also important in preventing infection. Work the solution into all four corners of the bag then allow it to drain through the drainage valve. Catheter wearers and their caregivers should always wash their hands with soap and warm water prior to touching the catheter tubing, drainage bag or the catheter insertion site.

. Wash your hands a final time after you complete the cleaning process.Open the valve on the drainage spout at the end of the old drainage bag and allow it to drain into the toilet or a bed pan. Always wear medical gloves if you are changing your catheter or disconnecting the drainage bag.Wash your hands and the insertion siteProper hand washing techniques are the number one way to prevent infection and complications for people who wear urinary catheters because our hands carry bacteria that could get into the catheter system and cause an infection. Allow this solution to site for 20 to 30 minutes, then drain and rinse the bag a final time and hang it to dry with the valve open. Thoroughly cleaning a urinary catheter system involves cleaning and sanitizing the drainage bag, tubing and insertion site. Connect the new bag to the catheter tube. Pour a solution of one part vinegar, three parts hot water into the drainage bag